Remove/install charge air manifold · ar0941w8681d · Mercedes-Benz WIS

AR09.41-W-8681D

Remove/install charge air manifold

31.7.07

ENGINE 457.9 in MODEL 374, 375, 940, 942, 943, 944, 958

W09.41-1030-06

Shown on model 944

1 Charge air pipe

2 Charge air manifold

3 Electrical connector

4 Bolts

5 Fuel leakage line

6 Screw

B111 Charge air temperature and boost pressure combination sensor

S10 Start engine button (only up to engine end no. 065486)

S10.1 Start engine button/Stop engine button (only up to engine end no. 065487)

S11 Stop engine button (only up to engine end no. 065486)

Modification notes

10.2.06

Document revised completely.

 	Remove/install
1	Remove charge air pipe (1) from charge air cooler to charge air manifold (2)		AR09.41-W-1311F
2	Remove bolt (6) and push away fuel leak line (5) from charge air manifold (2)
3.1	Unlatch and disconnect electrical connector on Start engine button (S10) and Stop engine button (S11)	Up to engine end no. 065486
3.2	Unlatch and disconnect electrical connector on Start engine button/Stop engine button (S10.1)	As of engine end no. 065487
4	Remove electrical engine wiring harness on charge air manifold (2)
5	Unlatch and disconnect electrical connector (3) on charge air temperature and boost pressure combination sensor (B111)
6	Detach charge air manifold (2)	 Installation: Check seal rings on bolts (4). Observe installation position for seals on charge air manifold (2).
			*BA09.41-N-1003-01K
7	Install in the reverse order

 Charge air pipe/charge air cooling

Number	Designation		Engine 457.9


BA09.41-N-1003-01K	Bolt, charge air manifold to cylinder head	Nm	30