ar0941p8619cd

Remove/install charge air hoses

Tyyppi ar · aihe 09.41 · versio 0107 · 2012-11-15

Koskee: ENGINE 651 in MODEL 166, 172, 204, 207, 212, 218, 221

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 1 Moottori › 09 Imuilmanotto, ahtaminen › 09.41 Ahtoilmaputki/välijäähdytys — Mallisarja 166 · Mallisarja 172 · Mallisarja 204 · Mallisarja 207 · Mallisarja 212 · Mallisarja 218 · Mallisarja 221 · Mallisarja 651

EinPAS 15 Moottori › 15.30 Imuilmanotto/ahtaminen › 15.30.32 Putki/letku/venttiili — Mallisarja 166 · Mallisarja 172 · Mallisarja 204 · Mallisarja 207 · Mallisarja 212 · Mallisarja 218 · Mallisarja 221 · Mallisarja 651

AR09.41-P-8619CD

Remove/install charge air hoses

24.10.12

ENGINE

651 in MODEL 166, 172, 204, 207, 212, 218, 221

Remove/install charge air hoses

Illustration shows model 204

2

Charge air hose

3

Charge air hose

4

Engine charge air duct downstream of charge air cooler

5

Turbocharger

6

Mixing chamber

7

Intake manifold

8

Charge air cooler

M16/6

Throttle valve actuator

P09.41-2546-06

Remove/install charge air hoses

P09.41-2544-08

1

Clutch

3

Charge air hose

2

Charge air hose

Remove/install

Danger !

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

1

Open engine hood

MODEL 166

AR88.40-P-1000GQ

2

Remove engine air intake duct and turbocharger cooling duct upstream of air filter housing

MODEL 166

3

Remove bottom sections of soundproofing

MODEL 166

AR61.30-P-1001GQ

MODEL 172

AR94.30-P-5300W

MODEL 204.0/2/3, 207, 212, 218

AR94.30-P-5300EW

MODEL 204.9

AR61.20-P-1105CY

MODEL 221

AR61.20-P-1105SX

4

Remove charge air hose (2) upstream of charge air cooler (8)

AR09.41-P-1311-01AL

Installation:
Do not use any lubricant.
There is otherwise the danger that the charge air hose (2) will slip off upstream of the charge air cooler (8) during operation.

Installation:
Any existing oil residues must be thoroughly removed from the charge air hose (2) and the charge air duct before assembly.
There is otherwise the danger that the charge air hose (2) will slip off during operation.

Open connectors (1) and detach charge air hose (2).

5

Remove charge air hose (3) downstream of charge air cooler (8)

AR09.41-P-1311-01AL

Installation:
Do not use any lubricant.
There is otherwise the danger that the charge air hose (3) will slip off upstream of the charge air cooler (8) during operation.

Installation:
Any existing oil residues must be thoroughly removed from the charge air hose (3) and the charge air duct before assembly.
There is otherwise the danger that the charge air hose (3) will slip off during operation.

Open connectors (1) and detach charge air hose (3).

6

Install in the reverse order

Viitatut asiakirjat