AR09.10-P-1150PR | Remove, install air cleaner housing | 21.3.00 |
ENGINE 111.951 in MODEL 203.035 /235 /735
P09.10-2037-12
1 Catch
2 Connector
3 Hose clamp
4 Air cleaner housing
5 Connection hose
B2/5 Hot film mass air flow sensor
| Removing, installing | ||
1 | Turn catch (1) of the air inlet pipe (arrow) | ||
2 | Unplug connector (2) of hot film mass air flow sensor (B2/5) | ||
3 | Slacken hose clamp (3) | Installation: Inspect hose clamp, replace if necessary. | |
4 | Pull air cleaner housing (4) up and off and remove | Removal: Pull back air inlet pipe for this step. | |
Installation: Moisten rubber retainer of the air cleaner housing with lubricant. Inspect connection hose (5), replace if necessary. | |||
5 | Install in the reverse order |