Remove/install crankshaft position sensor

AR07.04-S-0059E

Remove/install crankshaft position sensor

06.03.2020

Engine

654.9 in model 447

1

Crankshaft position sensor

2

Electrical connector

3

Screw

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Remove lower engine compartment lining

AR61.20-S-1105E

2

Thoroughly clean area around crankshaft position sensor (1).

Assembly cleaner

*BR00.45-Z-1028-04A

3

Disconnect electrical connection (2).

4

Remove screw (3).

 Screw, position sensor of crankshaft to timing case

*BA07.04-N-1018-02EA

5

Remove crankshaft position sensor (1).

6

Install in the reverse order



Check

7

Read out and delete fault memory.



AD00.00-S-2000-04E

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

8

Perform engine test run.

 Sensors

Number

Designation

Engine 654.9 in model 447

BA07.04-N-1018-02EA

Screw, position sensor of crankshaft to timing case

Nm

8

Repair materials

Number

Designation

Order number

BR00.45-Z-1028-04A

Assembly cleaner

A 000 986 56 01