ar0310w0002j

Additional test works during an engine repair on piston/connecting rod and on cylinder barrel

Tyyppi ar · aihe 03.10 · versio 0104 · 2014-10-16

Koskee: ENGINE 900.9 in MODEL 375.1, 970, 972, 975, 976 ENGINE 902.9 in MODEL 375.1, 970, 972, 974, 975, 976 ENGINE 902.9 in MODEL 375.3, 950.5/6, 952.5/6, 953.6, 954.5 ENGINE 902.9 in MODEL 957 without CODE MS8 (Natural gas engine) ENGINE 924.9 in MODEL 958.0, 970, 972, 974, 975, 976 ENGINE 925.9 in MODEL 970, 972, 974 ENGINE 926.9 in MODEL 950.5/6, 952.5/6, 953.6, 954.5, 957, 958.2 ENGINE 926.9 in MODEL 958.0

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 1 Moottori › 03 Kampikoneisto › 03.10 Kiertokanget, männät — Mallisarja 375 (mallit 1**, 3**) · Mallisarja 900 (mallit 9**) · Mallisarja 902 (mallit 9**) · Mallisarja 950 (mallit 5**, 6**) · Mallisarja 952 (mallit 5**, 6**) · Mallisarja 953 (mallit 6**) · Mallisarja 954 (mallit 5**) · Mallisarja 957 · Mallisarja 958 (mallit 0**, 2**) · Mallisarja 970 · Mallisarja 972 · Mallisarja 974 · Mallisarja 975 · Mallisarja 976

EinPAS 15 Moottori › 15.15 Polttomoottori täydellinen/moottorikotelo/kampikoneisto › 15.15.40 Kiertokanki/mäntä — Mallisarja 375 (mallit 1**, 3**) · Mallisarja 900 (mallit 9**) · Mallisarja 902 (mallit 9**) · Mallisarja 950 (mallit 5**, 6**) · Mallisarja 952 (mallit 5**, 6**) · Mallisarja 953 (mallit 6**) · Mallisarja 954 (mallit 5**) · Mallisarja 957 · Mallisarja 958 (mallit 0**, 2**) · Mallisarja 970 · Mallisarja 972 · Mallisarja 974 · Mallisarja 975 · Mallisarja 976

Koskee myös moottoreita/vaihteistoja: 924 9**, 925 9**, 926 9**

AR03.10-W-0002J

Additional test works during an engine repair on piston/connecting rod and on cylinder barrel

06.08.2014

ENGINE

900.9 in MODEL 375.1, 970, 972, 975, 976

ENGINE

902.9 in MODEL 375.1, 970, 972, 974, 975, 976

ENGINE

902.9 in MODEL 375.3, 950.5/6, 952.5/6, 953.6, 954.5

ENGINE

902.9 in MODEL 957

without CODE MS8 (Natural gas engine)

ENGINE

924.9 in MODEL 958.0, 970, 972, 974, 975, 976

ENGINE

925.9 in MODEL 970, 972, 974

ENGINE

926.9 in MODEL 950.5/6, 952.5/6, 953.6, 954.5, 957, 958.2

ENGINE

926.9 in MODEL 958.0

Check

1

Remove oil filter element and check slats of oil filter element from outside for metal abrasion and swollen condition

Only in case of extreme wear or damage to the engine components.

Engine 900.9, 902.9, 925.9; engine 924.9 in model 970, 972, 974, 975, 976; engine 926.9 in model 950, 952, 953, 954, 957

AP18.00-W-0101B

Engine 924.9, 926.9 in model 958
No instructions were created yet for these variants.

2

Replace oil-water heat exchanger

Only if there is metal abrasion on the oil filter element lamella or in the engine oil circuit.

Engine 900.9, 924.9

AR18.30-W-6840JA

Engine 902.9, 925.9, 926.9 except in model 957

AR18.30-W-6840J

Engines 902.9, 926.9 in model 957

AR18.30-W-6840JB

3

Remove oil spray nozzles, check them and replace them if necessary

Only if the pistons were damaged.

AR18.00-W-4000J

4

Remove oil pump, disassemble and check for wear and damage by means of a visual inspection

Only when an increased amount of metal abrasion is found on oil filter element lamella.

MODELS 375, 950, 952, 953, 954, 958, 970, 972, 974, 975, 976

AR18.10-W-6020J

Model 957

AR18.10-W-6020JB

5

Replace engine oil and oil filter element

Only in case of metal abrasion or swollen oil filter element (coolant in engine oil circuit).

Engine 900.9, 902.9, 925.9; engine 924.9 in model 970, 972, 974, 975, 976; engine 926.9 in model 950, 952, 953, 954, 957

AP18.00-W-0101B

Engine 924.9, 926.9 in model 958
No instructions were created yet for these variants.

Viitatut asiakirjat