Install seal at constant throttle piston

Tyyppi ar · aihe 01.50 · versio 0101 · 2019-09-03

Koskee: Engine 904 in model 368, 382, 384, 685.284, 688 Engine 904 in model 688, 979 Engine 904 in model 693, 694 Engine 906 in model 368, 382 Engine 906 in model 693, 695 Engine 924 in model 368, 384, 685.282/284/289/290, 979 Engine 924 in model 693, 694, 695 Engine 924 in model 979 Engine 926 in model 368, 382, 384 Engine 926 in model 693, 695

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

AR01.50-B-1000-01A

Engine 904.9, 906.9, 924.9, 926.9

Engine	904 in model 368, 382, 384, 685.284, 688
Engine	904 in model 688, 979
Engine	904 in model 693, 694
Engine	906 in model 368, 382
Engine	906 in model 693, 695
Engine	924 in model 368, 384, 685.282/284/289/290, 979
Engine	924 in model 693, 694, 695
Engine	924 in model 979
Engine	926 in model 368, 382, 384
Engine	926 in model 693, 695

Install seal at constant throttle piston

904 589 05 63 00

Assembly tool

1	Support the  tapered bushing (1) on the piston (2).

2	Oil the new sealing ring (3) with engine oil and place it in the  tapered bushing (1).

 Pay attention to the correct ring assembly position in the piston.

 Replace the ring whenever it is removed from the piston.

3	Insert the  cylindrical bushing (4) over the  tapered bushing (1) and press the sealing ring (3), installing it in its housing in the piston (2).

4	After installation, check the perfect seat of the sealing ring (3) in its housing in the piston (2).

W01.50-0003-10