P01.10-3478-08
1 | Engine cover | 3 | Ball head | |
2 | Cold air guide | 4 | Elastomer bearing |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
| Remove/install | ||
1 | Detach the cold air guide (2) on the cold air intake manifold | ||
2 | Detach ball head (3) from elastomer bearing at engine | Installation: Coat elastomer bearing at engine with antiseize paste. | |
Lubricant, rubber assembly 1 l | |||
3 | Detach the elastomer bearings (4) and remove the engine cover (1) with the cold air guide (2) by moving it upwards | Installation: Coat elastomer bearing with lubricating paste. | |
Lubricant, rubber assembly 1 l | |||
4 | Check the elastomer bearings (4) for damage | If damage occurs to the elastomer bearing (4) | |
| |||
Replace elastomer bearing (4). | |||
5 | Install in the reverse order |
Viitatut asiakirjat
- as0000z001701a Loukkaantumisvaara teräväreunaisten autonosien aiheuttamien haavojen ja nirhautumisvammojen takia