ar0110p2405mrt

Remove/install engine cover

Tyyppi ar · aihe 01.10 · versio 0102 · 2018-02-21

Koskee: Engine 256.9 in model 222

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 1 Moottori › 01 Moottori (kokonaisuus), moottorin huohotus, sylinterinkansi, sylinteriryhmä › 01.10 Moottori (kokonaisuus) — Mallisarja 222

EinPAS 15 Moottori › 15.15 Polttomoottori täydellinen/moottorikotelo/kampikoneisto › 15.15.45 Suojus/verhous — Mallisarja 222

Koskee myös moottoreita/vaihteistoja: 256 9**

AR01.10-P-2405MRT

Remove/install engine cover

06.02.2018

Engine

256.9 in model 222

Remove/install engine cover

P01.10-3379-08

1

Engine cover

3

Ball head

2

Cold air guide

4

Elastomer bearing

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Remove/install

1

Detach the cold air guide (2) on the cold air intake manifold

2

Detach ball head  (3) from elastomer bearing at engine

Installation: Coat elastomer bearing at engine with antiseize paste.

Antifriction paste, rubber parts 2.5 kg, DBL 6867.00

*BR00.45-Z-1002-06A

3

Detach the elastomer bearings (4) and remove the engine cover (1) with the cold air guide (2) by moving it upwards

Installation: Coat elastomer bearings (4) with antiseize paste.

Antifriction paste, rubber parts 2.5 kg, DBL 6867.00

*BR00.45-Z-1002-06A

Check

4

Check elastomer bearings (4) and elastomer bearing at engine for damage

In the case of damage to elastomer bearings (4) and elastomer bearing at engine.

Replace elastomer bearings (4) and elastomer bearing at engine.

5

Install in the reverse order

Repair materials

Number

Designation

Order number

BR00.45-Z-1002-06A

Antifriction paste, rubber parts 2.5 kg, DBL 6867.00

A 000 989 01 60

Viitatut asiakirjat