ar0110d240001d

Removing and installing engine with removal fixture

Tyyppi ar · aihe 01.10 · versio 0105 · 2006-07-26

Koskee: ENGINE 904.908 /914 /923 /936 in MODEL 668, 670

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 1 Moottori › 01 Moottori (kokonaisuus), moottorin huohotus, sylinterinkansi, sylinteriryhmä › 01.10 Moottori (kokonaisuus) — Mallisarja 668 · Mallisarja 670 · Mallisarja 904 (mallit 908, 914, 923, 936)

EinPAS 15 Moottori › 15.15 Polttomoottori täydellinen/moottorikotelo/kampikoneisto › 15.15.15 Polttomoottori täydellinen — Mallisarja 668 · Mallisarja 670 · Mallisarja 904 (mallit 908, 914, 923, 936)

AR01.10-D-2400-01D

Removing and installing engine with removal fixture

Commercially available tools

Number

Designation

WH58.30-Z-1001-07A

Shackle, DIN 82101

Workshop equipment

WE58.40-Z-1022-11A

Engine supporting arm

Removing and installing engine with removal fixture

D22.10-0051-01

1 Unscrew top securing bolt at right and left engine mount.

Installation: Mount engine lightly onto the engine mounts, screw in the securing bolts and tighten by hand until they make contact. Then, lower the engine fully and tighten securing bolts fully.

Removing and installing engine with removal fixture

L01.10-0001-11

2 Insert engine supporting arm (1) and attach as close as possible to the lifting eyes (2, 3) at the engine by means of chains and shackle.

Before raising engine, set center of gravity and tighten clamping bolt (arrow) fully.

3 Raise engine slightly with fork-lift truck.

Removing and installing engine with removal fixture

D22.10-0052-01

4 Unscrew bolt at bottom at engine mount and remove right and left engine mounts complete.

Pay attention to installation position.
Inspect engine mounts for wear, replace if necessary.

5 Raise engine further and remove carefully.

Place down engine and transmission reliably after lifting out.