an8288w000109d

Prepare console housing for on-board unit for installation and install

Tyyppi an · aihe 82.88 · versio 0200 · 2003-08-15

Koskee: MODEL 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## up to 472725 with CODE (F04) Cab L (long) with CODE (DD2) Cab with 1550 mm floor-to-ceiling height except CODE (DD1) Cab with 1400 mm floor-to-ceiling height (car transporter) except CODE (DD3) Lowered cab with low roof Mautsystem Fa. Grundig in Fahrzeuge mit Tachograph FTCO MODEL 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## up to 472725 with CODE (F05) M-cab (medium-long) exce

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 3 Kori, päällysrakenne › 82 Korin sähkölaitteet › 82.88 Tietullijärjestelmä — Mallisarja 950 (mallit 0**, 1**, 2**, 3**) · Mallisarja 952 (mallit 0**, 1**, 2**, 3**) · Mallisarja 953 (mallit 1**, 3**) · Mallisarja 954 (mallit 0**, 1**, 2**)

EinPAS 31 Kommunikaatio/informaatio/viihdekeskus › 31.35 Ajopiirturi/tietullipääte › 31.35.3 Jälkiasennus/muutostyö — Mallisarja 950 (mallit 0**, 1**, 2**, 3**) · Mallisarja 952 (mallit 0**, 1**, 2**, 3**) · Mallisarja 953 (mallit 1**, 3**) · Mallisarja 954 (mallit 0**, 1**, 2**)

AN82.88-W-0001-09D

Prepare console housing for on-board unit for installation and install

Modification notes

17.7.03

Procedure modified

Steps 1 to 5

Prepare console housing for on-board unit for installation and install

W82.88-1058-11

1 Remove protective foil from the support webs (4) of the bracket (3).

2 Insert bracket (3) into the housing box (2) and when doing so guide wiring harness (5) through the bracket (3).

3 Position bracket (3) on left and at rear in the housing box (2) and adhere to the bottom of the housing box (2).

4 Connect cover panel to the housing box (2).

W82.88-1113-11

5 Insert sheet-metal frame (1) through the opening in the cover panel (6) into the bracket (3) and bend the retainer tabs.