ad4230d200002a

Anti-lock brake system (ABS/ABD) notes on operational faults

Tyyppi ad · aihe 42.30 · versio 0101 · 2003-06-10

Koskee: MODEL 901.0, 902.0, 903.0, 904.0, 901.3, 902.3, 903.3, 904.3, 901.4, 902.4, 903.4, 904.4 with CODE (BB0) Brake system antilock brake system ABS

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 2 Alusta › 42 Jarrujen hydrauliikka ja mekaniikka › 42.30 Lukkiutumattomat jarrut (ABS) — Mallisarja 901 (mallit 0**, 3**, 4**) · Mallisarja 902 (mallit 0**, 3**, 4**) · Mallisarja 903 (mallit 0**, 3**, 4**) · Mallisarja 904 (mallit 0**, 3**, 4**)

EinPAS 26 Aktiivinen turvajärjestelmä › 26.20 Jarru-/ pidonhallintajärjestelmä › 26.20.1 Perustieto — Mallisarja 901 (mallit 0**, 3**, 4**) · Mallisarja 902 (mallit 0**, 3**, 4**) · Mallisarja 903 (mallit 0**, 3**, 4**) · Mallisarja 904 (mallit 0**, 3**, 4**)

AD42.30-D-2000-02A

Anti-lock brake system (ABS/ABD) notes on operational faults

Wheel bearing play/air gap

If the wheel bearing play is too large, the wobble which occurs can influence the signals of the speed sensors. A voltage drop may occur if the distance between the speed sensor and rotor is too large. In this case, the input circuit is not yet triggered and the limit speed (vmin) is not achieved.

Rotor

Teeth which have worn down or broken off, dirt at the rotor or a rotor with the wrong number of teeth will affect the signals of the speed sensors and lead to an error message.

Tire size

Malfunctions can occur if tires of different sizes are fitted. Therefore always install tires of the same size. It is quite safe to install summer and winter tires of the same size on all wheels of an axle.