000 588 02 82 00 Filling unit

Type ws · topic 20.00 · version 0100 · 2015-01-30

Applies to: ENGINE ALL

Where it sits

Function group 1 Engine › 20 Engine cooling system › 20.00 General — Series 900 (models 9**) · Series 902 (models 9**) · Series 904 (models 918, 919, 924, 925, 938, 943, 957) · Series 906 (models 917, 918, 924, 953)

EinPAS 15 Engine › 15.25 Engine cooling system › 15.25.1 Basic information — Series 900 (models 9**) · Series 902 (models 9**) · Series 904 (models 918, 919, 924, 925, 938, 943, 957) · Series 906 (models 917, 918, 924, 953)

Also applies to engines/gearboxes: 139 ***, 254 ***, 256 ***, 272 ***, 276 ***, 282 ***, 457 9**, 541 9**, 542 9**, 608 ***, 700 4**, 700 420, 700 421, 700 422, 700 423, 715 3**, 715 5**, 722 6**, 722 9**, 724 ***, 724 0**, 724 033, 724 044, 724 045, 724 1**, 724 103, 724 114, 724 115, 724 120, 725 ***, 725 0**, 725 035, 725 037, 725 038, 725 085, 725 1**, 739 390, 739 391, 739 395, 739 396, 739 397, 739 398, 739 399, 740 698, 743 3**, 743 4**, 743 498, 746 971, 924 9**, 924 910, 925 9**, 926 9**

WS20.00-N-3010B

000 588 02 82 00 Filling unit

15.1.15

ENGINE

ALL

Verwendung in FG 20/Satz B

Purpose:
Coolant catching and filling unit to detect and top up engine coolant.
Reference information:
This criteria catalogue serves to provide support for selection of variants of workshop equipment available on the free market. It just describes the minimum requirement for fulfilling the Mercedes-Benz standard. There is therefore no reference made to manufacturer specific equipment or devices.

000 588 02 82 00

Minimum requirements:

 Pouring in coolant over a filter (pores) = 1000 μm (micrometer)

 Receptacle (filling capacity) for at least 80 liters of coolant