611 589 00 63 00 Connector

Type ws · topic 01.00 · version 0126 · 2011-01-10

Applies to: ENGINES 611 /980, 612 /965 /966, 613, 628, 629, 639, 642, 646, 647 /981, 648, 651, 668 ENGINES 648.960 in MODEL 220 ENGINES 646

Where it sits

Function group 1 Engine › 01 Complete engine, crankcase ventilation, cylinder head, crankcase › 01.00 General — Series 220 · Series 611 · Series 613 · Series 628 · Series 629 · Series 639 · Series 646 · Series 647 · Series 648 · Series 651 · Series 668

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.1 Basic information — Series 220 · Series 611 · Series 613 · Series 628 · Series 629 · Series 639 · Series 646 · Series 647 · Series 648 · Series 651 · Series 668

Also applies to engines/gearboxes: 612 ***, 612 965, 612 966, 642 ***

WS01.00-P-0057B

611 589 00 63 00 Connector

FG 01/05/Set B

16.12.10

ENGINES 611 /980, 612 /965 /966, 613, 628, 629, 639, 642, 646, 647 /981, 648, 651, 668

ENGINES 648.960 in MODEL 220

ENGINES 646

611 589 00 63 00

Use:

Connector for inserting into an injector bore for measuring pressure loss. In combination with adapter R1/4" to connection nipple for quick-coupling from compression recorder set 001 589 76 21 00 or
001 589 78 21 00 also for measuring compression.
Attachment is with the original tensioning claw.

Note:

Not for engines 611.981/687, 612.981, 647.981.
For engines 611.981/987, 612.981, 647.981 in model 906:
only use for AR05.30-D-3510B and AR05.30-D-3510NA

For engines 646 in model 906:

only use for AR05.30-D-3510SD
For engine OM 651:
Only use in combination with genuine clamping claw OM 642. Drill the fastening bore to a diameter of 7.5 mm.

    