Workshop equipment · sn0000d008014te · Mercedes-Benz WIS

SN00.00-D-0080-14TE

Workshop equipment

Model	910
	with code ME0 (Electric motor 85 kW)

Protective equipment for working in workshops on the eSprinter

Designation	Use	Technical note	Special tool (ST)
Industrial safety helmet	Manual disabling. Initial diagnosis of accident vehicles. Handling mechanically damaged high-voltage batteries (removal, assessment, storage in secure containers).	Protection against electrical hazards according to the European standard (EN) 397.	-
Face/eye protection	Manual disabling. Initial diagnosis of accident vehicles. Handling mechanically damaged high-voltage batteries (removal, assessment, storage in secure containers).	Face protection/eye protection is subject to the requirements as per EN 166. Face protection with an industrial safety helmet as per EN 397 may also be worn as an option.	-
Protective gloves	Manual disabling. Initial diagnosis of accident vehicles. Handling mechanically damaged high-voltage batteries (removal, assessment, storage in secure containers).	Voltage proof of at least 1,000 V alternating voltage/1,500 V direct voltage (maximum voltage in the vehicle 750 V direct voltage, as at 2014). Thermal protective effect according to Deutsche Industrie-Norm (DIN) EN 60903 :2012, section 5.8.2 must be documented. Resistance to acids and oils.	-
Arc-resistant jacket	Manual disabling. Initial diagnosis of accident vehicles. Handling mechanically damaged high-voltage batteries (removal, assessment, storage in secure containers).	The requirements of EN ISO 11612 apply for an arc-resistant jacket.	-
High voltage tape	Warning about dangerous electrical voltage.	Warning label	451 589 08 63 00
High voltage magnetic signs	Warning about dangerous electrical voltage.	-	-
High voltage tag	Warning about dangerous electrical voltage.	-	-

High voltage test equipment

Measuring instrument	Example
Voltage tester	Würth 2-pin multitester Pro ll LED
Multimeter	Gossen Metrawatt
Insulation measuring unit	Fluke 1507
Infrared thermometer	Fluke 561

Procurement

Personal protective equipment in accordance with country-specific requirements prevalent in the free market as per the specified standards or scopes of protection must be made available to affected employees.

It is recommended to wear protective gloves with cotton lining; additionally, cotton glove liners are recommended for hygienic reasons.

The company-owned sales and service outlets and the Mercedes-Benz contract partners can order the personal protective equipment online via the Mercedes-Benz Partner Shop at:

http://partner-shop.mbvd.de

Check

1 All tooling, equipment, protection products and aids, which are specified for safe operation and working on, with or in the vicinity of electrical systems, must be suitable for such use, be in proper working condition and be deployed as intended.

2 Visual inspection of protective gloves before each use for cracks, piercing, abrasion or any other form of damage.

3 Check protective gloves for leaks before each use through trapping air in the glove and rolling it up (or by using a pneumatic glove tester).

4 Additional tests as specified by manufacturer.

DC charging (high-voltage battery): DC charging function test during workshop visit

During the replacement of some components of the charging system (vehicle socket, high-voltage wiring harness, contactor box) as well as in the case of customer complaints relating to DC charging, it may be necessary to perform a function test by briefly connecting the vehicle to a DC charger.

Additional information will be made available in good time for the market launch in the repair and/or diagnostic descriptions in WIS as well as in the XENTRY Portal Parts Information "Workshop Equipment".