Apply wax preservation agent to underfloor (code: 1508P97B79)

SM97.20-P-0010A

Apply wax preservation agent to underfloor (code: 1508P97B79)

15.12.15

Model

292

Operation no. of the operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

P

02-9303

Perform preservation on underfloor



Check

1

Check whether vehicle is affected by measure

Model 292 as of 000522 up to 005829

SM97.20-P-0010-01AAA

Underfloor wax preservation

2

Remove underfloor paneling



AR61.30-P-1001GQ

3

Perform wax preservation in the area of main floor with rear engine mount (transmission crossbeam) (see picture a)

 Wax distribution: Preservation agent must be applied to the surfaces, edges and spot welds uniformly and without discontinuity. Preservation agent must be applied completely to the bolt heads, nuts and thread excess lengths.

 Performing the operations: Material processing takes place in accordance with the product information of the material manufacturer. Recommended coat thickness: 200 to 800 µm

 Points with wrong application of preservation agent must be cleaned with cleaner immediately.

Wax for vehicle underside (1 l container)

*BR00.45-Z-1002-05A

Cleaner

*BR00.45-Z-1025-04A

4

Carry out wax preservation in the area of rear engine support (see picture b)

 Wax distribution: Preservation agent must be applied to the surfaces, edges and spot welds uniformly and without discontinuity. Preservation agent must be applied completely to the bolt heads, nuts and thread excess lengths.

 Performing the operations: Material processing takes place in accordance with the product information of the material manufacturer. Recommended coat thickness: 200 to 800 µm

 Points with wrong application of preservation agent must be cleaned with cleaner immediately.

Wax for vehicle underside (1 l container)

*BR00.45-Z-1002-05A

Cleaner

*BR00.45-Z-1025-04A

5

Perform wax preservation in the area of integral carrier, steering and diagonal struts (see picture c)

 Wax distribution: Preservation agent must be applied to the surfaces, edges and spot welds uniformly and without discontinuity. Preservation agent must be applied completely to the bolt heads, nuts and thread excess lengths.

 Performing the operations: Material processing takes place in accordance with the product information of the material manufacturer. Recommended coat thickness: 200 to 800 µm

 Points with wrong application of preservation agent must be cleaned with cleaner immediately.

Wax for vehicle underside (1 l container)

*BR00.45-Z-1002-05A

Cleaner

*BR00.45-Z-1025-04A

6

Perform wax preservation in the area of steel underride guard (see picture d)

 Wax distribution: Preservation agent must be applied to the surfaces, edges and spot welds uniformly and without discontinuity. Preservation agent must be applied completely to the bolt heads, nuts and thread excess lengths.

 Performing the operations: Material processing takes place in accordance with the product information of the material manufacturer. Recommended coat thickness: 200 to 800 µm

 Points with wrong application of preservation agent must be cleaned with cleaner immediately.

Wax for vehicle underside (1 l container)

*BR00.45-Z-1002-05A

Cleaner

*BR00.45-Z-1025-04A

7

Perform wax preservation in the area of front axle (see picture e)

 Wax distribution: Preservation agent must be applied to the surfaces, edges and spot welds uniformly and without discontinuity. Preservation agent must be applied completely to the bolt heads, nuts and thread excess lengths.

 Performing the operations: Material processing takes place in accordance with the product information of the material manufacturer. Recommended coat thickness: 200 to 800 µm

 Points with wrong application of preservation agent must be cleaned with cleaner immediately.

Wax for vehicle underside (1 l container)

*BR00.45-Z-1002-05A

Cleaner

*BR00.45-Z-1025-04A

8

Perform wax preservation in the area of rear-end floor, diagonal struts, rear axle carrier and rear axle differential (see picture f)

 Wax distribution: Preservation agent must be applied to the surfaces, edges and spot welds uniformly and without discontinuity. Preservation agent must be applied completely to the bolt heads, nuts and thread excess lengths.

 Performing the operations: Material processing takes place in accordance with the product information of the material manufacturer. Recommended coat thickness: 200 to 800 µm

 Points with wrong application of preservation agent must be cleaned with cleaner immediately.

Wax for vehicle underside (1 l container)

*BR00.45-Z-1002-05A

Cleaner

*BR00.45-Z-1025-04A

9

Perform wax preservation in the area of rear axle (see picture g)

 Wax distribution: Preservation agent must be applied to the surfaces, edges and spot welds uniformly and without discontinuity. Preservation agent must be applied completely to the bolt heads, nuts and thread excess lengths.

 Performing the operations: Material processing takes place in accordance with the product information of the material manufacturer. Recommended coat thickness: 200 to 800 µm

 Points with wrong application of preservation agent must be cleaned with cleaner immediately.

Wax for vehicle underside (1 l container)

*BR00.45-Z-1002-05A

Cleaner

*BR00.45-Z-1025-04A

10

Install underbody paneling



AR61.30-P-1001GQ

Repair materials

Number

Designation

Order number

BR00.45-Z-1002-05A

Wax for vehicle underside (1 l container)

A 000 986 42 70 10

BR00.45-Z-1025-04A

Cleaner

A 005 989 19 71