sm8810p0008a

Rework sheet metal shackle on front fender (code: 1401P88A17)

Type sm · topic 88.10 · version 0100 · 2014-05-31

Applies to: MODEL 205

Where it sits

Function group 3 Body › 88 Detachable body components, exterior flaps › 88.10 Fenders — Series 205

EinPAS 35 Body/frame/detachable parts › 35.37 Fender › 35.37.30 Front fender — Series 205

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.40 Service measures — Series 205

SM88.10-P-0008A

Rework sheet metal shackle on front fender (code: 1401P88A17)

27.5.14

MODEL

205

Operation no. of the operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

P

028417

Rework left and right front fender

Rework sheet metal shackle on front fender (code: 1401P88A17)

1

Cover

2

Sheet metal lug

P88.10-2304-06

Check

1

Check whether vehicle is affected by measure

MODEL 205 from WDD2050041F000508 to WDD2050452F000971

SM88.10-P-0008-01AAA

Install

2

Open right front door

Perform step in same manner on left side of vehicle.

3

Push cover (1) between fender and A-pillar to side

4

Use long wedge to bend metal tab (2) so it has a gap to the A-pillar

Gap between metal tab (2) and A-pillar min. 2 mm!

Long wedge

*115589035900

5

Clean contact area for metal tab (2) on A-pillar and rework with touch-up paint pen

6

Move cover (1) into position between fender and A-pillar

Rework sheet metal shackle on front fender (code: 1401P88A17)

115 589 03 59 00

Long wedge

Parts ordering note

Part no.

Designation

Quantity

A 000 986 21 50 ****

Touch-up paint pen, standard finish

1

A 000 986 23 50 ****

Metallic touch-up paint pen

1

**** Color code to be determined through EPC to match equipment code.

*Vehicles with color code 799 (Diamond white bright) are reworked using the touch-up paint pen with color code 149 (Polar white).

Referenced documents