sm8800p0008a

Check installation of decorative foil (code: 1511P98C26)

Type sm · topic 88.00 · version 0100 · 2016-02-09

Applies to: Model 205 with code P97 (Edition 1)

Where it sits

Function group 3 Body › 88 Detachable body components, exterior flaps › 88.00 General — Series 205

EinPAS 40 Preservation/paintwork › 40.15 Paintwork/paintwork care › 40.15.3 Retrofitting/modification — Series 205

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.40 Service measures — Series 205

SM88.00-P-0008A

Check installation of decorative foil (code: 1511P98C26)

08.02.2016

Model	205
	with code P97 (Edition 1)

Operation no. of the operation texts or standard texts and flat rates
Category	Op. no.	Operation text	Time	Acc. no.	Code
P	02-9315	Check decorative foil
P	02-9316	Retrofit decorative foil (after check)

Check installation of decorative foil (code: 1511P98C26)

P88.00-2602-07

1	Decorative foil on rear bumper		3	Decorative foil on mirror housing
2	Decorative foil above longitudinal member panel

	Check
1	Check whether vehicle is affected by measure	Model 205 as of 199904 up to 274481	SM88.00-P-0008-01AAA
2	Check whether decorative foil has been applied to rear bumper (1), longitudinal member panel (2) and mirror housing (3).	 It is essential to consult the customer before applying the decorative foils! The findings from the scope of testing must always be written onto the workshop order and filed in a tamperproof manner!
		If decorative foils have been applied.
		
		End the measure.
		If decorative foils have not been applied.
		
		continue with operation step 3.
	Apply decorative foil
3	Apply decorative foil above longitudinal member panel (2)		SM88.00-P-0008-02A
	000 588 00 84 00 Heat gun		WS54.00-P-0049B
		 The temperature of the body of the vehicle/component to which foil is to be applied, and the ambient air at the workbay as well as the temperature of the foil sections must be 22 °C ( 5 °C).
4	Apply decorative foil to rear bumper (1)		SM88.00-P-0008-03A
		 The temperature of the body of the vehicle/component to which foil is to be applied, and the ambient air at the workbay as well as the temperature of the foil sections must be 22 °C ( 5 °C).
5	Apply decorative foil to mirror housing (3)		SM88.00-P-0008-04A
	000 588 00 84 00 Heat gun		WS54.00-P-0049B
		 The temperature of the body of the vehicle/component to which foil is to be applied, and the ambient air at the workbay as well as the temperature of the foil sections must be 22 °C ( 5 °C).

Parts ordering note

Part no.	Designation	Quantity
A 205 987 00 75	Right side trim strip	n. B.
A 205 987 01 75	Left side trim strip	n. B.
A 205 987 03 75	Left and right mirror housing trim strip	n. B.

Referenced documents

sm8800p000801aaa Affected vehicles: Check installation of decorative foil (code: 1511P98C26)
sm8800p000802a Apply decorative foil above longitudinal member panel (code: 1511P98C26)
sm8800p000803a Apply decorative foil to rear bumper (code: 1511P98C26)
sm8800p000804a Apply decorative foil to mirror housing (code: 1511P98C26)
ws5400p0049b 000 588 00 84 00 Heat gun