Operation no. of the operation texts or standard texts and flat rates | |||||
Category | Op. no. | Operation text | Time | Acc. no. | Code |
N | 027939 | Retrofit cover for wiring harness for driver suspension seat | 0,2 h | 68 910 66 | ABDECK-KA |
N | 027941 | Retrofit cover for wiring harness for passenger suspension seat (cover installed on driver side) | 0,2 h | 68 910 66 | ABDECK-KA |
Shown on the driver-side |
1 | Floor covering |
2 | Floor covering |
3 | Cover |
4 | Suspension seat |
5 | Entrance paneling |
W68.30-1187-02
W68.30-1188-02
| Install | ||
1.1 | Fold floor covering (1) in footwell toward front driver side | Vehicles without CODE F2A (cab floor even) | |
1.2 | Fold floor covering (2) in driver side footwell over along perforation | Vehicles with CODE F2A (cab floor even) | |
2 | Install cover (3) on driver side | ||
3 | Fold back floor covering (1) and lay edge of floor covering (1) below door sill trim (5) | Only on vehicles without CODE F2A (cab floor even). | |
4 | Perform operation steps 1 to 3 on passenger side | Only if front passenger suspension seat is installed. |