sm6000w0004a

Check assembly position of dropside roller

Type sm · topic 60.00 · version 0100 · 2019-06-20

Applies to: Model 967 Code: MONT-BORD

Where it sits

Function group 3 Body › 60 Body - general › 60.00 General — Series 967

EinPAS 35 Body/frame/detachable parts › 35.22 Auxiliary frame › 35.22.30 Auxiliary frame — Series 967

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.40 Service measures — Series 967

SM60.00-W-0004A

Check assembly position of dropside roller

06.06.2019

Model	967
	Code: MONT-BORD

Operation no. of the operation texts or standard texts and flat rates
Category	Op. no.	Operation text	Time	Acc. no.	Code
N	021500	Check assembly position of dropside roller	0,1 h	60 930 57	MONT-BORD
N	021501	Correct assembly position of dropside roller (after check)	0,1 h	60 930 57	MONT-BORD

Check assembly position of dropside roller

1	Roller support arm
2	Pin
3	Pin
A	Inner position
B	Outer position

W60.00-A000-06

	Remove
1	Open dropside and fold down.	 All operation steps are to be performed on the left and right side.
	Check
2	Check roller support arm (1) for correct assembly position (A).	 The roller support arm (1) must be on the inner position. The wall stop of the cargo liftgate must not collide with the roller support arm (1).
		If the roller support arm (1) is on the inner position (A),
		
		continue with operation step 6.
		If the roller bearing arm (1) is on the outer position (B),
		
		continue with operation step 3.
	Correct
3	Remove bolts (2, 3).
4	Adapt position of roller support arm (1).
5	Install bolts (2, 3).
	Install
6	Fold up and close dropside.