sm5430p0010b

Install software for instrument cluster

Type sm · topic 54.30 · version 0100 · 2011-01-25

Applies to: MODEL 204, 218

Where it sits

Function group 2 Chassis › 54 Electrical system, equipment and instruments › 54.30 Instrument cluster, display instruments, hazard warning device — Series 204 · Series 218

EinPAS 31 Communication/information/entertainment › 31.30 Instrument cluster/onboard computer › 31.30.11 Control unit/relay — Series 204 · Series 218

EinPAS 31 Communication/information/entertainment › 31.30 Instrument cluster/onboard computer › 31.30.15 Indicator/display — Series 204 · Series 218

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.40 Service measures — Series 204 · Series 218

SM54.30-P-0010B

Install software for instrument cluster

20.1.11

MODEL 204, 218

Operation no. of operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

P

024762

Connect/disconnect Diagnosis Assistance System (DAS)

P

025058

Connect/disconnect battery charger (with DAS connected)

P

027065

Install instrument cluster control unit software

(with DAS connected)

List of affected vehicles

Model 204 from
WDD2040011A458768 to WDD2040571A460030

SM54.30-P-0010-01BAA

Model 218 from
WDD2183031A000258 to WDD2183731A000345

SM54.30-P-0010-01BAB

Remove/install

1

Connect DAS/XENTRY

Use DAS/XENTRY version 11/2010 or higher. The operation steps must be performed as per DAS/XENTRY.

If DAS/XENTRY is already connected, continue with operation step 2.

2

Connect battery charger

Use the battery charger to ensure that an adequate power supply (min. 12.5 V) is provided for the on-board electrical system battery.

Installing the software

last approx. 70 minutes

3

Install instrument cluster control unit software

To do so, select "Control units"-"Adaptations"-"Control units programming" menu item.

4

Disconnect DAS/XENTRY

Referenced documents