Retrofit blower in engine compartment (code: 1411P54C36) · sm5400p0010a · Mercedes-Benz WIS

SM54.00-P-0010A

Retrofit blower in engine compartment (code: 1411P54C36)

26.6.15

Model

453

Operation no. of the operation texts or standard texts and flat rates
Category	Op. no.	Operation text	Time	Acc. no.	Code
C	02-8785	Retrofit blower in engine compartment
C	02-8823	Extra work for retrofitting blower in engine compartment in vehicles with vibration damper

1	Cover
2	Body bolt

P54.00-3126-04

3	Vibration damper
4	Vibration damper

P54.00-3127-04

Nuts

P54.00-3128-04

	Check
1	Check whether vehicle is affected by measure	Model 453 as of 000053 up to 008499	SM54.00-P-0010-01AAA
 	Remove/install
2	Detach left rear wheel-and-tire assembly
3	Remove left rear fender liner.
4	Remove trim (1)
5	Mount bracket for blower to specified body bolt (2)	 Installation: Tightening torque combination nut 8 Nm
	Check
6	Check vibration damper on engine mount	Vibration damper version (3) installed.
		
		Proceed with step 7.
		No vibration damper or vibration damper (4) installed.
		
		Continue with operation step 8.
 	Remove/install
7	Remove vibration damper (3)	 Removal: Support transmission on left side using transmission jack.
		 Removal: The hexagon nut must not be released before the transmission support is in place! Nut must be replaced.
		 Installation: Hexagon nut tightening torque: 62 Nm
8	Mount blower with bolts and nut (3) to bracket	 Installation: Tightening torque 8 Nm
9	Fasten electrical line on blower housing (arrows)
10	Install in the reverse order

Parts ordering note

Part no.	Designation	Quantity
A 415 990 19 50	Hexagon nut	n. B. *
A 415 990 20 50	Hexagon nut with collar	2
A 415 990 25 01	Screw	1
A 453 610 39 01	Bracket	1
A 453 906 48 00	Blower	1
A 453 990 15 50	Combined nut/washer	2
	* Only required when vibration damper (3) is installed.

sm5400p001001aaa Affected vehicles: Retrofit blower in engine compartment (code: 1411P54C36)