sm4910p0010a

Check cover for exhaust system

Type sm · topic 49.10 · version 0100 · 2011-06-29

Applies to: MODEL 204.0 with CODE (772) AMG styling package - front spoiler, side skirts and rear apron with CODE (954) Avantgarde

Where it sits

Function group 1 Engine › 49 Exhaust system, exhaust gas cleaning › 49.10 Exhaust pipes, catalytic converter, mufflers — Series 204 (models 0**)

EinPAS 15 Engine › 15.40 Exhaust system/exhaust aftertreatment › 15.40.41 Manifold/pipe/muffler/exhaust gas hose — Series 204 (models 0**)

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.40 Service measures — Series 204 (models 0**)

SM49.10-P-0010A

Check cover for exhaust system

28.6.11

MODEL 204.0
with CODE (772) AMG styling package - front spoiler, side skirts and rear apron
with CODE (954) Avantgarde

Check cover for exhaust system

P49.10-2966-04

1 Rear muffler

2 Exhaust system cover

Operation no. of operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

P

027224

Check cover for exhaust system, correct if necessary

Affected vehicles

Model 204 from
WDD2040021A488608 to WDD2040021A538509

SM49.10-P-0010-01A

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Danger!

Risk of injury from grazing or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels.

AS00.00-Z-0017-01A

Checking

1

Visual inspection of cover position

Exhaust system (2)

The exhaust system cover (2) must not protrude. The exhaust system cover (2) must be flush-fitted to the bumper with AMG Style (picture B).

Once the exhaust system cover (2) has been fitted to match, end the measure.

If the exhaust system cover (2) is not fitted to match (picture A), continue with operation step 2.

Remove/install

2

Position exhaust system cover

Release bolt, cover

Position exhaust system (2) flush to the bumper and tighten bolt.

Installation: 10 Nm

Referenced documents