SM42.45-S-0010A | Install software for Electronic Stability Program control unit | 29.1.10 |
MODEL 639.701 2# as of 382392 up to 556008 with ENGINE 646.980
with CODE (BB4) Preparation of rear axle steering, London taxi
with CODE (MP2) Engine OM 646, DE22 LA, 85KW (116 BHP) 3800 rpm
Operation no. of operation texts or standard texts and flat rates
Category | Op. no. | Operation text | Time | Acc. no. | Code |
VV | 026493 | Install software for Electronic Stability Program control unit | --- | 5495169 | TAXILONDON |
| List of affected vehicles | Model 639 from | |
Install software | |||
1 | Connect DAS | Use DAS version 09/2009 or higher. | |
It is absolutely essential to closely follow the steps as per DAS. | |||
2 | Connect battery charger | Using the battery charger ensure an adequate power supply (min. 12.5 V) of the on-board electrical system battery. | |
3 | Install software for Electronic Stability Program control unit | "Control units"-"Chassis"-"ESP - Electronic Stability Program"-"Initial startup"-"Control unit programming" menu item. | |
4 | Perform SCN coding in electronic ignition/starter switch control unit | "Control units"-"Body"-"EZS [EIS] - electronic ignition/starter switch"-"Control unit adaptations"-"SCN coding" menu item. | |
5 | SCN coding in Electronic Stability Program control unit | "Control units"-"Suspension"-"Electronic Stability Program - Electronic Stability Program"-"Control unit adaptations"-"SCN coding" menu item. | |
6 | Read out fault memory, erase if necessary | ||
7 | Disconnect DAS |
Referenced documents
- ad0000s200004s Connect STAR DIAGNOSIS and read out fault memory
- sm4245s001001aaa Affected vehicles: Install software for Electronic Stability Program control unit