sm4245p0010b

Install software for Electronic Stability Program control unit

Type sm · topic 42.45 · version 0100 · 2010-05-03

Applies to: MODEL 197

Where it sits

Function group 2 Chassis › 42 Brakes - hydraulic and mechanical systems › 42.45 Electronic Stability Program (ESP), stability control (SR) — Series 197

EinPAS 26 Active safety system › 26.20 Braking/traction control › 26.20.11 Control unit/relay — Series 197

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.40 Service measures — Series 197

SM42.45-P-0010B

Install software for Electronic Stability Program control unit

29.4.10

MODEL 197

Operation no. of operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

P

024762

Connect and disconnect Diagnosis Assistance System (DAS)

P

025058

DISCONNECT/CONNECT BATTERY CHARGER (WITH DAS CONNECTED)

P

026799

Install ESP control unit software (with DAS connected)

List of affected vehicles

Model 197 from
WDD1973771A000085 to WDD1973772A000144

SM42.45-P-0010-01BAA

Remove/install

1

Connect Xentry DAS

If Xentry DAS is already connected, proceed with operation step 2.

AD00.00-P-2000-04A

Use Xentry DAS version 01/2010 with add-on 1411 or Xentry DAS version 03/2010 with add-on 1412 or higher. The steps must be performed in accordance with Xentry DAS.

2

Connect battery charger

Use the charger to ensure that an adequate power supply (min. 12.5 V) is provided for the on-board electrical system battery.

3

Install software for Electronic Stability Program control unit (N30/4)

To do this select "ESP-Electronic Stability Program"-"adaptations"-"configuration"-"control unit programming" menu.

4

Carry out SCN coding for Electronic Stability Program control unit (N30/4)

To do this select "Electronic Stability Program-"-"adaptation"-"configuration"-"SCN coding" menu.

5

Complete Xentry DAS

AD00.00-P-2000-04A

Referenced documents