SM42.00-W-0002A | Re-route sensor cable to the brake cylinders of the front axle | 13.6.08 |
MODEL 970.3, 972.3, 976.3
W42.00-1023-11
Shown on right of front axle
1 Sensor cable
2 Bracket for brake cylinder
3 Cable tie (wide)
Operation no. of operation texts or standard texts and flat rates
Category | Op. no. | Operation text | Time | Acc. no. | Code |
O | 026645 | OPERATIONS: CORRECT ROUTING OF SENSOR CABLE TO LEFT AND RIGHT OF FRONT AXLE | 0,4h | 42 901 71 | SENSOR-LTG [SENSOR LINE] |
| Remove/install | ||
Danger! | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut. | |
1 | Tilt cab | ||
| Notes on tilting the cab | ||
2 | Re-route sensor cable (1) to the left and right of front axle in the area of the bracket for the brake cylinder (2) | Route sensor cable (1) as shown in the picture and fasten with cable ties. Use a wide cable tie (3) on the bracket for the brake cylinder (2). | |
Danger! | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut. | |
3 | Lower cab | ||
| Notes on tilting the cab |
Parts ordering notes
Part no. | Designation | Quantity |
A 002 997 58 90 | Cable tie (wide) | 1 |
A 002 997 24 90 | Cable tie (narrow) | 5 |
Referenced documents
- ah6080n000301a Notes on tilting the cab
- as6080z000101a Risk of injury caused by body parts being pinched or crushed as cab is tilted