Replace bottom cover on front axle carrier and apply corrosion protection (stage 3)

SM33.10-P-0010A

Replace bottom cover on front axle carrier and apply corrosion protection (stage 3)

27.7.10



Removing

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Danger!

Risk of explosion caused by paint vapors igniting. Risk of poisoning caused by inhaling paint vapors.

No smoking! No open flames! Use respiratory protection, protective clothing, gloves, safety goggles and skin cream. Ensure that the area is well ventilated.

AS98.00-Z-0002-01A

1

Remove all plastic covers in the repair area of the front axle carrier (2)

2

Replace cover (1) on

front axle carrier (2)

SM33.10-P-0010-01A

Zinc dust paint suitable for spot welding

*BR00.45-Z-1001-07A

3

Clean front axle carrier (2) thoroughly

Tar remover

*BR00.45-Z-1020-04A

4

Mask off surroundings of front axle carrier (2)

5

Prime bare areas

Zinc dust paint suitable for spot welding

*BR00.45-Z-1001-07A

6

Paint front axle carrier (2) using spray can

7

Seal front axle carrier (2) using cavity wax

Preservation agent

*BR00.45-Z-1003-05A



Install

8

Attach spacers in bores (3) of front axle carrier (2)

9

Install all plastic covers in the repair area of the front axle carrier (2)

Number

Designation

Order number

BR00.45-Z-1020-04A

Tar remover

A 001 986 40 71

BR00.45-Z-1003-05A

Cavity preservation, solvent-free (1 l container)

A 000 986 72 70 05

BR00.45-Z-1001-07A

Zinc dust paint suitable for spot welding

A 000 986 34 42

Part no.

Designation

Quantity

A 116 997 15 81

30 mm spacer

2

A 210 628 15 16

Reinforcement plate

1