sm3232p0004a

Program adaptive damping system control unit and attach information label (code: 1611P32D08)

Type sm · topic 32.32 · version 0100 · 2017-04-12

Applies to: Model 222

Where it sits

Function group 2 Chassis › 32 Suspension › 32.32 Level control with adaptive damping system (ADS) — Series 222

EinPAS 20 Chassis › 20.16 Suspension › 20.16.11 Control unit/relay — Series 222

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.40 Service measures — Series 222

EinPAS 45 Data/information › 45.35 Marking › 45.35.20 Signs/adhesive labels — Series 222

SM32.32-P-0004A

Program adaptive damping system control unit and attach information label (code: 1611P32D08)

10.04.2017

Model

222

Operation no. of the operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

P

02-4762

Connect/disconnect diagnostic system (XENTRY/DAS)

P

02-5058

Connect/disconnect battery charger (with XENTRY/DAS connected)

P

02-9334

Update control unit ......................... software (with XENTRY/DAS connected), acc. no.: .........., code: ..........

P

02-9788

Attach information sign for Adaptive Damping System to B-pillar

Program adaptive damping system control unit and attach information label (code: 1611P32D08)

1

Information sticker

P00.10-6154-03

Check

1

Check whether vehicle is affected by measure


Model 222 as of 249498 up to 265675

SM32.32-P-0004-01AAA

Programming

2

Connect diagnostic unit

Use XENTRY Diagnostics version 11/2016 or higher with all available addons. The operation steps must be performed exactly as per XENTRY Diagnostics! Make sure that the vehicle's on-board electrical system battery has sufficient voltage supply (more than 12.5 V) by using a battery charger. If Xentry Diagnostics is already connected to the vehicle, continue with operation step 3.

AD00.00-P-2000-04B

3

Program adaptive damping system control unit

To do so, select menu item Control units  Suspension  ADS Adaptive Damping System  Adaptations  Control units update  Update of control unit software.

Then follow the user guidance in Xentry Diagnostics.

If two or more instances of control unit programming or SCN coding are carried out during a workshop visit, the operation items 02­4762 and 02­5058 must only be charged once for each workshop order.

4

Disconnect diagnostic equipment

AD00.00-P-2000-04B

Install

5

Attach information label (1) for adaptive damping system to B-pillar on driver's side

Parts ordering note

Part no.

Designation

Quantity

A 000 817 53 01

Information sticker

1

Referenced documents