Perform SCN coding in adaptive damping system (ADS) control unit (code: 1603P32A93)

SM32.32-P-0002A

Perform SCN coding in adaptive damping system (ADS) control unit (code: 1603P32A93)

14.06.2016

Model

217

Operation no. of the operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

P

02-4762

Connect/disconnect diagnostic system (XENTRY/DAS)

P

02-5058

Connect/disconnect battery charger (with XENTRY/DAS connected)

P

02-9334

Update control unit software ......................... (with XENTRY/DAS connected)



Check

1

Check whether vehicle is affected by measure

Model 217 as of 015772 up to 018805

SM32.32-P-0002-01AAA

Programming

2

Connect diagnostic unit

Use XENTRY Diagnostics version 03/2015 with all available add-ons or a newer version. Please make sure to follow the steps exactly as described in XENTRY Diagnostics. Make sure that the vehicle's on-board electrical system battery has sufficient voltage supply (more than 12.5 V) by using a battery charger. If Xentry Diagnostics is already connected to the vehicle, continue with operation step 3.



AD00.00-P-2000-04B

3

Perform SCN coding in AIRmatic control unit (N51/3)

 To do so, select menu item Control units view  Suspension  ADS­Adaptive damping system  Adaptations  Control units update  Update of SCN coding.

 Then follow the user guidance in XENTRY Diagnostics.

 If two or more instances of control unit programming or SCN coding are carried out during a workshop visit, the operation items 02­4762 and 02­5058 must only be charged once for each workshop order.

4

Disconnect diagnostic equipment



AD00.00-P-2000-04B