sm2719p0004e

Install software for electronic transmission control (ETC) control unit

Type sm · topic 27.19 · version 0100 · 2009-03-18

Applies to: TRANSMISSION 722.6 in MODEL 212 with CODE (423) Automatic five-speed transmission (NAT)

Where it sits

Function group 2 Chassis › 27 Automatic transmission › 27.19 Transmission - electrical system — Series 212

EinPAS 17 Drivetrain/axle › 17.20 Transmission › 17.20.11 Control unit/relay — Series 212

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.40 Service measures — Series 212

Also applies to engines/gearboxes: 722 6**

SM27.19-P-0004E

Install software for electronic transmission control (ETC) control unit

13.3.09

TRANSMISSION 722.6 in MODEL 212 with CODE (423) Automatic five-speed transmission (NAT)

Operation no. of operation texts or standard texts and flat rates

Category

Op. no.

Operation text

P

024762

Disconnect/connect Diagnostic Assistance System (DAS)

P

025058

Connect and disconnect battery charger (with DAS connected)

P

026339

Install software for electronic transmission control (EGS) (with DAS connected)

List of affected vehicles

Model 212 from
WDD2120021A000499 to WDD2120031A000743

SM27.19-P-0004-01EAA

Remove/install

1

Connect DAS

If DAS is already connected, proceed with operation step 2.

AD00.00-P-2000-04A

Use DAS version 03/2009 or a higher DAS version.

It is absolutely essential to closely follow the steps as per DAS.

2

Connect battery charger

Using the battery charger ensure an adequate power supply (at least 12.5 V) of the on-board electrical system battery.

3

Install software for electronic transmission control (ETC) control unit

Select menu item "control unit programming".

4

Disconnect DAS

AD00.00-P-2000-04A

Referenced documents