sm0941s0022a

Replace boost pressure sensor and charge air temperature sensor (code: VS20LAP2T2)

Type sm · topic 09.41 · version 0100 · 2016-08-16

Applies to: Model 447.6## ## as of 825024 up to 826569 with engine 622

Where it sits

Function group 1 Engine › 09 Air intake, turbocharging › 09.41 Charge air pipe/charge air cooling — Series 447 (models 6**) · Series 622

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.12 Sensor/switch/wiring harness — Series 447 (models 6**) · Series 622

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.40 Service measures — Series 447 (models 6**) · Series 622

SM09.41-S-0022A

Replace boost pressure sensor and charge air temperature sensor (code: VS20LAP2T2)

11.08.2016

Model

447.6## ## as of 825024 up to 826569 with engine 622

Operation no. of the operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

P

02 9621

Operations: Check boost pressure and charge air temperature sensor

---

09 900 68

VS20LAP2T2

P

02 9622

Operations: Replace boost pressure and charge air temperature sensor (after check)

---

09 900 68

VS20LAP2T2

Replace boost pressure sensor and charge air temperature sensor (code: VS20LAP2T2)

B5/14

Charge air pressure and temperature sensor

A

Manufacturer: "Continental"

B

Manufacturer: "Bosch"

S09.41-4627-06

Check

1

Check whether vehicle is affected by measure

Affected vehicles: Replace boost pressure sensor and charge air temperature sensor (code: VS20LAP2T2)

SM09.41-S-0022-01A

For authorized Mercedes­Benz service partners, only the entry in the Extended VEGA Application (EVA) edition, in the "Current" tab is decisive. An additional test of the affected vehicles in the workshop information system (WIS) or vehicle list is thereby not necessary.

2

Check manufacturer of the charge air pressure and temperature sensor (B5/14)

The charge air pressure and temperature sensor (B5/14) from the "Continental" manufacturer (A) must be replaced.

Manufacturer printed-on (see arrows)

If "Bosch" (B) is printed as manufacturer on the charge air pressure and temperature sensor component (B5/14).

Vehicle not affected by measure and can be handed over to the customer.

If "Continental" (A) is printed as manufacturer on the charge air pressure and temperature sensor component (B5/14).

Continue with operation step 3.

Replace

3

Replace charge air pressure and temperature sensor (B5/14)

Remove/install boost pressure/charge air temperature sensor

AR09.41-S-2007EF

Parts ordering note

Part no.

Designation

Quantity

A 607 905 04 00

Boost pressure sensor and charge air temperature sensor

1

Referenced documents