sm0900p0002a

Rework air duct on fan shroud (code: 1705P09B26)

Type sm · topic 09.00 · version 0100 · 2017-10-28

Applies to: Model 213

Where it sits

Function group 1 Engine › 09 Air intake, turbocharging › 09.00 General — Series 213

EinPAS 15 Engine › 15.25 Engine cooling system › 15.25.45 Fan/fan clutch/fan drive — Series 213

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.40 Service measures — Series 213

SM09.00-P-0002A

Rework air duct on fan shroud (code: 1705P09B26)

25.10.2017

Model

213

Operation no. of the operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

P

02-4354

Rework air duct on fan shroud

Rework air duct on fan shroud (code: 1705P09B26)

P09.00-2166-07

1

Air duct

4

Bolts

2

Fan shroud

Maß a

15 mm

3

Felt strip

Check

1

Check whether vehicle is affected by measure.


Model 213 as of 164424 up to 190433

SM09.00-P-0002-01AAA

Remove

2

Detach air duct (1) from fan shroud (2).

Install

3

Attach three felt strips (3) onto fan shroud.

Stick one felt strip (3) between catch hooks with approx. 2 mm gap to front edge and two felt strips (3) in front of each of the catch hooks.

Cut felt strips (3) to size: 40 mm x 25 mm x 2 mm

4

Insert air duct (1) into fan shroud (2) and drill two holes to Ø 3 mm with drill.

Drilling dimensions: See picture.

5

Fasten air duct (1) using two bolts (4) on upper side onto fan shroud (2).

Parts ordering note

Part no.

Designation

Quantity

A 001 983 23 10

Felt strip

1 *

N 000 000 00 05 21

Screw

2

* 1 packaging unit is to be used for approx. 10 vehicles.

Referenced documents