Change software release in engine management control module (MCM) and exhaust aftertreatment control module (ACM)

SM07.15-W-0010A

Change software release in engine management control module (MCM) and exhaust aftertreatment control module (ACM)

18.2.13

MODEL

963, 964 with ENGINE 936.9

Code: ACM-MCM

Operation no. of the operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

N

028166

Change software release in engine management (MCM) and exhaust aftertreatment (ACM) control units

0,8 h

07 975 51

ACM-MCM

Change software release

1

Connect diagnostic system, start XENTRY Diagnostics and switch on ignition

 For the updating procedure to be performed, the following version must be installed on the diagnostic system:
 Version 01/2013 with add-on 2664
As of version 03/2013, the flashware is available in the regular release.

2

Perform quick test

 The quick test is stored at the end of the diagnosis session as the initial quick test and can be printed out.

3

Change software release in engine management (MCM) control unit

 To do so, select following menu items:
 "MCM - engine management (A4)"
 "Adaptations"
 "Initial startup"
 "Control unit programming"

4

Change software release in exhaust aftertreatment (ACM) control unit

 To do so, select following menu items:
 "ACM - engine management (A60)"
 "Adaptations"
 "Initial startup"
 "Control unit programming"

5

Delete fault memory in all control units

 If necessary, process the existing fault code, subject to a separate repair order.

6

Perform quick test, print out initial quick test and final quick test

 No fault codes should be present in the control units.

7

End XENTRY Diagnostics and disconnect diagnostic system