Replace vehicle identification plate (code: VS4TYPGEW)

SM00.10-S-0061A

Replace vehicle identification plate (code: VS4TYPGEW)

24.05.2019

Model

470.2## #G as of 032707 up to 033268

Operation no. of the operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

P

02 3686

Operations: Replace vehicle identification plate

-

58 917 55

VS4TYPGEW

1

Cap

2

Cap

3

Frame seal

4

Right front door

5

Instrument panel

6

Vehicle identification plate

7

Right A-pillar

6

Vehicle identification plate

8

Heat protection

9

Vehicle body tape

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S



Check

1

Check whether vehicle is affected by measure.

Affected vehicles: Replace vehicle identification plate (code: VS4TYPGEW)

SM00.10-S-0061-01AAA

 For authorized Mercedes­Benz service partners, only the entry in the "Extended VEGA Application" (EVA) system, in the "Current" tab, is decisive. An additional test of the affected vehicles in the workshop information system (WIS) or vehicle list is thereby not necessary.



Remove

2

Remove covers (1, 2).

 Long wedge

*115589035900

3

Partially loosen sealing frame (3) of right front door (4) along the working area.

4

Cover plastic parts of instrument panel (5) and right front door (4) with heat protection (8) in the working area.

5

Heat up vehicle identification plate (6) uniformly.



000 588 00 84 00 Heat gun

WS54.00-P-0049B


Do not overheat vehicle identification plate (6).
This prevents damage to paint from overheating.

6

Loosen a corner of the vehicle identification plate (6) using a suitable tool.

7

Mark position of old vehicle identification plate (6) (e.g. using body tape (9)).

 Immediately after marking the position, begin the next operation step. Otherwise the working area that was previously heated cools down and it becomes more difficult to remove the old vehicle identification plate (6).

8

Remove vehicle identification plate (6) at right A-pillar (7) using a suitable tool.

9

Clean bonding area of the vehicle identification plate (6) with silicone remover.


The bonding area of the vehicle identification plate (6) must be absolutely free of dust and grease.
Otherwise there may be adhesion problems.

 Do not clean beyond the bonding area of the vehicle identification plate (6).

Silicone remover, order No. 893222600

*BR00.45-Z-1060-04A

10

Replace vehicle identification plate (6) at right A-pillar (7).

 Reattach new vehicle identification plate (6) exactly at marked position.



Install

11

Remove previously-applied marking.

12

Remove heat protection (8).

13

Secure sealing frame (3) of right front door (4).


Do not use any lubricant.
Otherwise leakage is not possible.

 Ensure that sealing frame (3) is seated correctly.

14

Install covers (1, 2).

Repair materials

Number

Designation

Order number

BR00.45-Z-1060-04A

Silicone remover, order No. 893222600

Adolf Würth GmbH & Co. KG
Reinhold-Würth-Str. 12-17
74653 Künzelsau-Gaisbach
Germany
Tel. +49 7940 15-0
Fax +49 7940 15-1000
http://www.wuerth.de

Parts ordering note

Part no.

Designation

Quantity

A 470 584 99 01 26

Vehicle identification plate (please quote vehicle identification number when ordering) (except code 524L/528L/ZJ7)

1

A 470 584 00 02 26

Vehicle identification plate (please quote vehicle identification number when ordering) (with code 524L/528L)

1

A 470 584 01 02 26

Vehicle identification plate (please quote vehicle identification number when ordering) (with code ZJ7)

1