sm0010s0032a

Replace tire pressure specification information label, supply tire approval certificate and insert for owner's manual

Type sm · topic 00.10 · version 0100 · 2014-10-31

Applies to: MODEL 447.8## ## as of 003846 up to 006335

Where it sits

Function group 0 Overall › 00 Overall vehicle › 00.10 Complete vehicle, technical data, tests required by law — Series 447 (models 8**)

EinPAS 45 Data/information › 45.15 Operator's manual › 45.15.20 Data — Series 447 (models 8**)

EinPAS 45 Data/information › 45.15 Operator's manual › 45.15.21 Legal requirements — Series 447 (models 8**)

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.40 Service measures — Series 447 (models 8**)

EinPAS 45 Data/information › 45.35 Marking › 45.35.20 Signs/adhesive labels — Series 447 (models 8**)

SM00.10-S-0032A

Replace tire pressure specification information label, supply tire approval certificate and insert for owner's manual

29.10.14

MODEL

447.8## ## as of 003846 up to 006335

Operation no. of the operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

P

02 8723

Operations: Replace/supply information label, certificate, insert for owner's manual

40 910 75

VS20MIETRE

Replace tire pressure specification information label, supply tire approval certificate and insert for owner's manual

1

Information sticker

S00.10-4510-02

Check

1

Check whether vehicle is affected by measure

MODEL 447.8## ## as of 003846 up to 006335
Affected vehicles: Replace tire pressure specification information label, supply tire approval certificate and insert for owner's manual

SM00.10-S-0032-01AAA

Ordering

2

Order tire pressure specification information label (1), tire approval certificate and insert for owner's manual

Order tire pressure specification information label, tire approval certificate and insert for owner's manual, form

OF00.10-S-3000-10A

Create TIPS case and sent to headquarters. Fill out order form and attach to TIPS case, specifying vehicle identification number and delivery address.

Remove/install

3

Replace information label (1) for tire pressure specification on fuel filler flap

Installation:
The bonding area on the fuel filler flap must be absolutely free of dust and grease.
Otherwise there may be adhesion problems.

Installation: Attach new information label (1) for tire pressure specification to same position again.

To this end, remove information label (1) for tire pressure specification and adhesive residues using suitable tools.

Provide

4

Insert for owner's manual with owner's manual in glove compartment

Handover

5

Hand tire approval certificate to the customer

Check

6

Check tire pressure, correct if necessary

Parts ordering note

Part no.

Designation

Quantity

Information label on tire pressure specification

1

Tire approval certification

1

Insert for owner's manual

1

Referenced documents