sm0010p0018a

Retrofit protective foil for vehicle identification number

Type sm · topic 00.10 · version 0100 · 2011-08-17

Applies to: MODEL 172

Where it sits

Function group 0 Overall › 00 Overall vehicle › 00.10 Complete vehicle, technical data, tests required by law — Series 172

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.40 Service measures — Series 172

EinPAS 45 Data/information › 45.35 Marking › 45.35.22 Company sign/model badge/type plate/license plate — Series 172

SM00.10-P-0018A

Retrofit protective foil for vehicle identification number

11.8.11

MODEL 172

Retrofit protective foil for vehicle identification number

P00.10-5103-04

1 Air-water duct

A Protective foil adhesive area

Operation no. of operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

P

027293

Retrofit protective foil for chassis number

List of affected vehicles

Model 172 from
WDD1724481F003398 to WDD1724571F004808

SM00.10-P-0018-01AAA

Removing

1

Open engine hood

2

Remove air-water duct (1) at right front

Install

3

Clean protective foil adhesive area (A)

4

Prepare protective foil

Length: 120 mm, height: 21.6 mm

One protective foil is enough for 2 vehicles.

5

Align and attach protective foil

Attach over the entire vehicle identification area in the protective foil adhesive area (A).

6

Install air-water duct (1) at right front

7

Close engine hood

Parts ordering notes

Part no.

Designation

Quantity

Small parts such as stop nuts, sealing rings, cable ties, fluids etc. are no longer shown on the parts listing. The required small parts are taken into account in the cost framework

A 219 698 07 78

Protective foil

1

Referenced documents