si8880d0002a

Service Information: Replace the clips on the protective strips

Type si · topic 88.80 · version 0100 · 2011-11-07

Applies to: MODEL 906.### #S up to 413437

Where it sits

Function group 3 Body › 88 Detachable body components, exterior flaps › 88.80 Cover strips — Series 906

EinPAS 35 Body/frame/detachable parts › 35.38 Bumper/spoiler/outer trim/stowage box/front protective paneling › 35.38.44 Trim/trim element/front protective paneling — Series 906

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.20 Service information — Series 906

SI88.80-D-0002A

Service Information: Replace the clips on the protective strips

3.11.11

MODEL 906.### #S up to 413437

Due to recent events we would like to notify you that generally, when performing assembly operations on the protective strips at the side, all the clips should be replaced. The reason for this is the improved quality of the clips.

Furthermore, the mounting of the new clips will result in an unwanted diffused light effect on the position lamps. To avoid this, the new cable grommets must also be installed.

To mount the new cable grommets, make a cut far enough into them crosswise at the grommet so that the connector plug can then be fitted.

Please notify your over-the-counter sales of this procedure.

Parts ordering notes

Part no.

Designation

Quantity

A 002 991 85 70

Clip

if required

A 906 546 13 61

Cable grommet

if required