si8262p0002a

Service Information: Changed repair method for replacing rear window/antenna amplifier

Type si · topic 82.62 · version 0101 · 2007-05-04

Applies to: MODEL 203.7## ## up to 932723

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.62 Loudspeakers, amplifiers, antennas — Series 203 (models 7**)

EinPAS 31 Communication/information/entertainment › 31.80 Antenna/antenna amplifier › 31.80.14 Transmitter/receiver — Series 203 (models 7**)

EinPAS 36 Visibility › 36.15 Glass pane/window › 36.15.42 Rear window — Series 203 (models 7**)

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.20 Service information — Series 203 (models 7**)

SI82.62-P-0002A

Service Information: Changed repair method for replacing rear window/antenna amplifier

26.4.07

MODEL 203.7## ## up to 932723

Service Information: Changed repair method for replacing rear window/antenna amplifier

P82.62-3118-06

Due to condensate penetrating booster module 1, window antenna (A2/71), (with one or two booster modules depending on the equipment), sealing rails (2) will be fitted to these as of VIN 932724.

The sealing rails (2) must be installed on vehicles where the rear window (1) or amplifier module 1, window antenna (A2/71) is replaced and the vehicle does not yet have any sealing rails. The sealing rails (2) can be ordered under the part number A 203 820 00 91.

Remove/install antenna amplifier module

AR82.62-P-8300P

Remove/install antenna amplifier module sealing rail

AR82.62-P-8300-05P

Remove/install rear window

AR67.20-P-3550PA

Referenced documents