A | Surface |
P68.30-3838-74
In model 205, the trim pieces of the center console and doors have a piano lacquer finish, to match the selected equipment.
If dust has collected on the surface (A) owing to electrostatic charging, dry cleaning using microfiber cloths must never be performed as this can cause fine scratches on the surface (A). A corresponding cleaning note has therefore been made in the operating instructions.
To reduce the sensitivity of the interior trim pieces to scratching, a finisher is additionally applied to the surface (A) at the factory. To maintain the surface protection properties of the finisher and to prevent scratching of the surface (A), the following must be observed when cleaning:
The trim pieces must not be treated with commercially available cleaners as they can remove the finisher.
It is recommended to use a cotton cloth from the MercedesBenz product range in combination with clear water.
Please observe the information given above when performing any preparatory work on the vehicle (service cleaning) at your dealership and when giving advice to customers.