SI58.40-P-0010A | Service Information: Modified display when doing quick tests in STAR DIAGNOSIS | 6.4.04 |
MODELS 129, 163, 168, 170, 171, 202, 203, 208, 209, 210, 211, 215, 220, 230, 414, 463, 639
Modification notes
Modified results display when doing quick tests in STAR DIAGNOSIS as of 04/04.
Events:
An event, as compared to a fault code, does not point to a problem, but rather to a certain condition that has occurred.
Example:
Battery control unit MODEL 211:
Event 9050 consumer shutoff stage 1
This is not a problem with the battery control unit, but rather the voltage of the battery was, for a certain amount time, too low.
The battery control unit then starts to shut down several consumers (e.g. heated seats) to protect the integrity of the on-board electrical system.
Events will be increasingly integrated into STAR DIAGNOSIS over the next few months.
The previous quick test results -v- , -F- and -!- are expanded to include the following functions:
-v- : The control unit does not have any saved faults or events
when an alarm is triggered.
-F- : The control unit has at least one current fault.
-f- : The control unit only has saved faults.
: The control unit has events.
-!- : No communication can be established with the control unit.
New F4 button in the quick test display:
With the F4 button you can now switch between the following displays in the quick test:
Display of all control units (as previously)
Display of control units that have fault codes
Display of control units that have events