Service information: Oxygen sensor connector housing

Type si · topic 49.10 · version 0201 · 2009-07-29

Applies to: ENGINE 642 in MODEL 164.120 /122 ## as of 515320 up to 517212, 164.120 /122 ## as of 517484 up to 517877

Where it sits

Function group 1 Engine › 49 Exhaust system, exhaust gas cleaning › 49.10 Exhaust pipes, catalytic converter, mufflers — Series 164 (models 120, 122)

EinPAS 15 Engine › 15.45 Engine management › 15.45.12 Sensor/switch/wiring harness — Series 164 (models 120, 122)

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.20 Service information — Series 164 (models 120, 122)

Also applies to engines/gearboxes: 642 ***

SI49.10-P-0010A

Service information: Oxygen sensor connector housing

28.7.09

ENGINE 642
in MODEL 164.120 /122 ## as of 515320 up to 517212,
164.120 /122 ## as of 517484 up to 517877

Modification notes

6.5.09

Part number for connector housing updated

 In the above-mentioned vehicles, when replacing the oxygen sensor, the connector housing on the engine wiring harness also has to be replaced.

Procedure:

1 Unpin lines from old connector housing

2 Install lines into new connector housing

3 Insert oxygen sensor and install in line with specifications

Operation no. of operation texts or standard texts and flat rates

Category	Op. no.	Operation text
P	075320	Replace connector for O2 probe

Parts ordering notes