SI41.10-D-0004A | Service Information bulletin: Use of modified propeller shaft intermediate bearing with protective caps | 20.7.10 |
MODEL 906
D41.10-1134-04
1 Grooved ball bearing
2 Protective cap
A Old version without protective caps
B New version with protective caps
Due to recent events we would like to notify you that with immediate effect the rejected center support bearing without protective caps can now be retrofitted on a bearing with protective caps.
The conversion is only allowed in a complaint case. In this case, all propeller shaft center support bearings are to be retrofitted once.
Except model 906.713/733
In this case, the propeller shaft assembly is to be replaced once.
Warranty and goodwill claims with bearing complaints in which the propeller shaft has been replaced will be redebited.
| Removing | ||
1 | Remove propeller shaft | ||
| Disassemble | ||
2 | Remove propeller shaft center support bearing | 2-piece propeller shaft | |
1-piece propeller shaft | |||
| Assemble | ||
3 | Install new propeller shaft center support bearing with protective caps | 2-piece propeller shaft | |
1-piece propeller shaft | |||
| Install | ||
4 | Install propeller shaft |
Parts ordering notes
Part no. | Designation | Quantity |
A 906 410 15 81 | Parts kit for center support bearing without shim (1-piece propeller shaft) | 1 |
A 906 410 16 81 | Parts kit for center support bearing with shim (1-piece propeller shaft) | 1 |
A 906 410 17 81 | Parts kit for center support bearing without shim (2-piece propeller shaft) | 1 |
A 906 410 18 81 | Parts kit for center support bearing with shim (2-piece propeller shaft) | 1 |
Referenced documents
- ar4110d0050h Remove/install propeller shaft
- ar4110d0101h Remove/install propeller shaft intermediate bearing
- ar4110d0101ha Remove/install propeller shaft intermediate bearing
- ar4110d0101i Remove/install propeller shaft intermediate bearing