si4015p0008a

Service Information: Note on tire pressure sensors

Type si · topic 40.15 · version 0101 · 2017-04-18

Applies to: Model 213, 238

Where it sits

Function group 2 Chassis › 40 Wheels, chassis alignment check › 40.15 Tire pressure/tire pressure monitoring — Series 213 · Series 238

EinPAS 26 Active safety system › 26.29 Tire pressure loss detection system/tire pressure control › 26.29.12 Sensor/switch/wiring harness — Series 213 · Series 238

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.20 Service information — Series 213 · Series 238

SI40.15-P-0008A

Service Information: Note on tire pressure sensors

12.04.2017

Model

213, 238

Due to recent events please remember that on model 213 and model 238 new PAL tire pressure sensors (Phase  Autolocation) are now in use. These are not compatible with the previous systems (CORAX from Schrader). Therefore, the tire pressure sensors from the predecessor models cannot undergo the teach-in process. New tire pressure sensors have to be used.

In this instance, the replacement of the tire pressure sensors may not be settled through the warranty and goodwill process. The details in the WIS or the EPC must be observed for proper identification.

Service Information: Note on tire pressure sensors
Service Information: Note on tire pressure sensors

P40.15-2637-01

Tire pressure sensor, Delta generation in model 213

Tire pressure sensor, Gamma generation in model 212

P40.15-2638-01