si3510l0002a

Service Information: Tightening torque, brake disk bolt to wheel hub, modified

Type si · topic 35.10 · version 0100 · 2003-06-17

Applies to: REAR AXLE 742.505 in MODELS 668, 670

Where it sits

Function group 2 Chassis › 35 Rear axle › 35.10 Complete rear axle — Series 668 · Series 670

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.41 Wheel carrier/steering knuckle/wheel hub/wheel bearing — Series 668 · Series 670

EinPAS 21 Brakes/vacuum system/compressed-air system › 21.15 Service brake/vacuum system › 21.15.42 Service brake, rear — Series 668 · Series 670

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.20 Service information — Series 668 · Series 670

Also applies to engines/gearboxes: 742 505

SI35.10-L-0002A

Service Information: Tightening torque, brake disk bolt to wheel hub, modified

20.3.02

REAR AXLE 742.505 in MODELS 668, 670

For the given reason, we would like to inform you that we have modified the tightening torque for the bolt that connects the brake disk to the wheel hub.

This modified tightening torque must be observed when doing repair work on the part.

Bolt, brake disk to wheel hub: 135 Nm

This modification will also be documented in the next version of the WIS CD in the workshop literature.

Disassemble, assemble rear wheel hub

Rear axle 742.505

AR35.20-L-0320A

Referenced documents