si3036w0004a

Service Information: Parameterization of maximum speed limit

Type si · topic 30.36 · version 0100 · 2008-08-20

Applies to: MODEL 374, 375, 930, 932, 933, 934, 940, 942, 943, 944, 949, 950, 952, 953, 954, 957, 958, 970, 972, 974, 975, 976

Where it sits

Function group 1 Engine › 30 Throttle control, speed control systems › 30.36 Speed limiter (GB, GBE, GBL) — Series 374 · Series 375 · Series 930 · Series 932 · Series 933 · Series 934 · Series 940 · Series 942 · Series 943 · Series 944 · Series 949 · Series 950 · Series 952 · Series 953 · Series 954 · Series 957 · Series 958 · Series 970 · Series 972 · Series 974 · Series 975 · Series 976

EinPAS 28 Convenience system/driver assistance system › 28.25 Speed control › 28.25.1 Basic information — Series 374 · Series 375 · Series 930 · Series 932 · Series 933 · Series 934 · Series 940 · Series 942 · Series 943 · Series 944 · Series 949 · Series 950 · Series 952 · Series 953 · Series 954 · Series 957 · Series 958 · Series 970 · Series 972 · Series 974 · Series 975 · Series 976

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.20 Service information — Series 374 · Series 375 · Series 930 · Series 932 · Series 933 · Series 934 · Series 940 · Series 942 · Series 943 · Series 944 · Series 949 · Series 950 · Series 952 · Series 953 · Series 954 · Series 957 · Series 958 · Series 970 · Series 972 · Series 974 · Series 975 · Series 976

SI30.36-W-0004A

Service Information: Parameterization of maximum speed limit

18.8.08

MODEL 374, 375, 930, 932, 933, 934, 940, 942, 943, 944, 949, 950, 952, 953, 954, 957, 958, 970, 972, 974, 975, 976

The parameterization of the maximum speed limit has been conducted up till now solely using a chip card.

As of Star Diagnosis release 08/2008 the parameterization process will be extended by an online process.

The requirements for conducting online process are:

Networked Star Diagnosis device

Xentry flash authorization of user

The new work procedure is described in the document

AR30.36-W-0100A Parameterize maximum speed limit (parameterization through online process).

The online process is recommended for parameterization of the maximum speed limit.

When conducting parameterization, the laws of each country concerned must be observed.

In Germany, the maximum speed specified in the German Vehicle Licensing Regulations (StVZO) must be adhered to.

Parameterize maximum speed limit

Parameterization through online process.

AR30.36-W-0100A

Referenced documents