si1325t0001c

Service Information: Belt tensioner

Type si · topic 13.25 · version 0100 · 2006-03-28

Applies to: ENGINE 457 in MODEL 613

Where it sits

Function group 1 Engine › 13 Air compressor, belt drives › 13.25 Belt tensioning device — Series 613

EinPAS 15 Engine › 15.18 Belt drive › 15.18.30 Belt/belt pulley/clamping device/guide pulley — Series 613

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.20 Service information — Series 613

Also applies to engines/gearboxes: 457 ***

SI13.25-T-0001C

Service Information: Belt tensioner

20.3.06

ENGINE 457 in MODEL 613

Noises from belt drive or belt tensioner.

In the past belt tensioners were replaced frequently on account of noise complaints.

When examining the belt tensioners A 457 200 20 70 with noise complaints most noises could not be comprehended and no defect could be found.

The noise sources or possible external influences which lead to noises can only be determined in the installed condition.

It is therefore necessary in the case of noise complaints to examine the vehicle of the contract partner together with the service manager/area manager before removing the belt tensioner.

After this, information is given to Hrn. Hiller (ASK-RPS) via the Service Dept, in order after consultation to send a team of experts on site.

The belt tensioner must not be removed without agreement.

Contact:

Mr. Hiller

ASK Ulm

Tel.: +49-(0)731-181-89 20

E-Mail: [email protected]