si0941w0004a

Service Information: Charge air pipe assembly

Type si · topic 09.41 · version 0100 · 2014-06-16

Applies to: ENGINE 900.9, 904.9, 924.9 in MODEL 970, 972, 974, 975, 976

Where it sits

Function group 1 Engine › 09 Air intake, turbocharging › 09.41 Charge air pipe/charge air cooling — Series 900 (models 9**) · Series 904 (models 9**) · Series 970 · Series 972 · Series 974 · Series 975 · Series 976

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.33 Intake manifold/charge air pipe — Series 900 (models 9**) · Series 904 (models 9**) · Series 970 · Series 972 · Series 974 · Series 975 · Series 976

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.20 Service information — Series 900 (models 9**) · Series 904 (models 9**) · Series 970 · Series 972 · Series 974 · Series 975 · Series 976

Also applies to engines/gearboxes: 924 9**

SI09.41-W-0004A

Service Information: Charge air pipe assembly

10.6.14

ENGINE

900.9, 904.9, 924.9 in MODEL 970, 972, 974, 975, 976

Service Information: Charge air pipe assembly

1

Charge air pipe (cold)

2

Charge air pipe (hot)

3

Bracket

4

Screw

5

Bracket

6

Turbocharger

7

Clip

8

Clip

W09.41-1108-06

Incorrect procedure when mounting the charge air pipes (1, 2) leads to stress between turbocharger (6) and charge air pipe (2). This can damage the turbocharger (6), the charge air pipes (1, 2) or the brackets (3, 5).

In order to ensure mounting without causing stress, the operation steps necessary for installing the charge air pipes must only be carried out in a certain specified sequence.

The new repair instructions "Sequence for mounting the charge air pipes" explain the necessary operation steps in the specified sequence.

Sequence for charge air pipe assembly

AR09.41-W-1311-03A

Referenced documents