20 - 2720 Removing and installing coolant thermostat housing
1 Coolant pipe | |
2 Banjo union | |
3 Seals | replace. |
4 Coolant pipe | |
5 Hexagon nut | |
6 Electric cable for temperature sensor | |
7 Hexagon bolt | 30 Nm. |
8 Coolant thermostat housing | |
9 Gasket | replace. |
10 Connection fitting | replace. |
11 Coolant pipe |
Removal, installation
-------------------------------
1 Partially drain coolant into a vessel.
Installation note
Pour in coolant and check cooling system for leaks.
2 Separate electric lead for temperature sensor. Take off coolant hose and coolant pipes.
3 Unscrew hexagon bolts and take off coolant thermostat housing. Check parts, clean sealing surface.
Installation note
Install new gasket and new connection fitting. Tighten hexagon bolts, 30 Nm.
Referenced documents
- ra0013d000200x 0002 - General, Installation survey Engine 364 LA (Euro2) Engine Model 354
- ra2013d000400x 0004 - General, Special tools Engine 364 LA (Euro2) Model 354
- ra2013d000500x 0005 - General, Technical data Engine 364 LA (Euro2) Model 354
- wh2050tra0000x 2050 - Cooling and heating system Checking the condition and for leaks All models
- wh2080tra0020x 2080.20 - Replacement of coolant Engines 314, 352, 364, 364 A/LA