07.2-184 Removing, installing fuel pump
Operation no. of operation texts and work units or standard texts and flat rates 07-5713 |
1074-16205
Fuel pump suction and pressure hose | detach, attach. Close with clamps 000 589 40 37 00 to prevent fuel flowing out. |
Fastening nuts (131) | remove, fit on. |
Fuel pump (133) | remove, install. |
Insulating flange (132) | remove, install. Examine condition of rubber seals, replace insulating flange if necessary. Plunger in insulating flange must move freely (pay attention to installation instruction). |
Special tool
Installation instruction
The actuating plunger for the fuel pump must be pushed into the insulating flange in such a way that the locking ring is facing the fuel pump. At the same time ensure that the actuating plunger moves freely.
Examine condition of rubber seals (arrow) in the insulating flange. Replace complete insulating flange, if necessary.
The rubber seals are not available as spare parts.
107-21144
Insulating flange for fuel pump drive of a further manufacturer (Backhaus).
Production breakpoint: February-May 1987
Model | Engine | Engine-end-no. manual transmission | Engine-end-no. automatic transmission | Veh.ident.end no. |
124.020 124.080 | 102.922 | 038940-044689 | 015793-018343 | A 434960-A 513106 F 034049-F 1) |
201.023 | 102.924 | 031763-034617 | 008128-008926 | A 363274-A 385036 F 332663-F 1) |
1) not recorded
Referenced documents
- ra07001020001x 0001 - Model designations, installation overview, distinguishing feature KAT/RÜF Engine 102 - 2 E-E Carburetor
- ra07001020090x 0090 - Description of design and function General, Brief description, Components and arrangement, Function details Engine 102 - 2 E-E Carburetor
- ra0700102pr4ax Programmed repairs: Carburetor system Engine 102 - 2 E-E Carburetor
- ra0700102ta00x Technical modifications: Carburetor system Engine 102 - 2 E-E Carburetor