ra05541040407x

4.7 - Checking the basic position of the camshafts Engine 104 in model 463

Type ra · topic 05.20 · version 9503 · 1995-01-15

Applies to:

Where it sits

Function group 1 Engine › 05 Engine timing › 05.20 Camshaft, camshaft adjustment

Also applies to engines/gearboxes: 104 996

05.54 Checking basic position of camshafts

Preceding work:

Cylinder head cover removed (01.54-2.10/1).

4.7 - Checking the basic position of the camshafts Engine 104 in model 463
4.7 - Checking the basic position of the camshafts Engine 104 in model 463

P05-5523-13

P05-5531-13

Cylinder 1

position in ignition TDC.

To do this,

rotate crankshaft until TDC marking on vibration damper is aligned with TDC pointer (arrow) (01.54-2.4/1).

The 4 mm holes in the camshaft flanges (arrows)

must be tensioned to the upper edge of cylinder head.

To do this,

insert pins (1) into holes (arrows).

Note

The camshaft adjuster of the inlet camshaft must be at "retarded" stop (stop in direction of rotation of camshaft).

Referenced documents