Wiring diagram for tire pressure control system (RDRA)

Type pe · topic 40.16 · version 0102 · 2013-04-18

Applies to: MODEL 437.420/421/425/426/430/431/435 ## as of 208609 with CODE A30 (Tire pressure control system (tire control)) Vehicles for non-civilian use MODEL 437.436 ## as of 208609 with BODY 425.8 (except 425.852) with CODE A30 (Tire pressure control system (tire control)) Vehicles for non-civilian use MODEL 437.436 with BODY 425.852 with CODE A30 (Tire pressure control system (tire control)) with CODE F10 (Cab protected) Vehicles for non-civilian use

Where it sits

Function group 2 Chassis › 40 Wheels, chassis alignment check › 40.16 Tire pressure control system — Series 437 (models 420, 421, 425, 426, 430, 431, 435, 436)

Also applies to engines/gearboxes: 425 800, 425 801, 425 808, 425 820, 425 821, 425 822, 425 823, 425 825, 425 828, 425 829, 425 830, 425 831, 425 835, 425 836, 425 840, 425 842, 425 843, 425 845, 425 846, 425 848, 425 850, 425 851, 425 852, 425 853, 425 854, 425 855, 425 857, 425 858, 425 859, 425 865, 425 866, 425 867, 425 870, 425 880, 425 885

The document body couldn't be read: byte 0: unknown command '{'

Referenced documents

gf0019g1000d Location and assignment of line and connectors
gf0019g200004d Location and assignment of ground points - interior left
gf0019g200005da Location and assignment of ground points, interior compartment, right
gf0019g200014d Location and assignment of ground points - frame
gf0019g2000d Location and assignment of ground points
gf0019g300004d Location and assignment of Z connector sleeves (cable connections in wiring harness) - interior left
gf0019g3000d Arrangement and assignment of Z connector sleeves (cable and plug connectors in wiring harness)
ov0001g100127ca Abbreviations for wiring diagrams
ov0001g100128ca Abbreviations of signal and circuit designations for wiring diagrams
ov0001g190103ca Use of wiring diagrams
ov0001g1901d Search aid for all wiring diagram groups
pe0019g215097da Wiring diagram of CAN bus
pe5421g240097df Wiring diagram for base module